MY Heavy Duty Slurry Pump

Type MY heavy duty slurry pump is single casing, horizontal, centrifugal slurry pump. Its performance is similar with type standard heavy duty slurry pump, but the efficiency is above 10% higher than the same size of standard heavy duty slurry pump. Considering the flow characteristic of slurry in pump chamber, we design the hydraulic model. Meanwhile the drive part is oil lubricated through the circulation of oil decrease bearing temperature, thus prolong the pump service life. Due to the single casing design which reduces the pump weight, easy for assembly and lower cost. Suitable for single stage or lower stage in series.

 

MY Heavy Duty Slurry Pump Range

Discharge Size: 2〞-6〞

Capacity:  20-170  m³/h

Heads: 5-75 m

 

MY Heavy Duty Slurry Pump Application:

Mill Discharge, Coarse Sand,  Tailings, Mineral Concentration,  Heavy Media, Coal Washing,

FGD, Process Chemical,

Bottom /Fly Ash, Metal Smelting

 

Advantage for MY Heavy Duty Slurry Pump

1)Single casing for metal pump which can have lower cost and light weight

2)Outline dimension is completely interchangeable with standard heavy duty slurry pump, so we can change to rubber liner when acid application

3)Lubrication oil is recycling which has the effects of lubrication, cooling, cleaness and seal, and get long service life

4)The four bolts in bearing assembly also can used as motor plate bolt when the pump with CV drive type